This site uses cookies.
Some of these cookies are essential to the operation of the site,
while others help to improve your experience by providing insights into how the site is being used.
For more information, please see the ProZ.com privacy policy.
Freelance translator and/or interpreter, Verified site user
Data security
This person has a SecurePRO™ card. Because this person is not a ProZ.com Plus subscriber, to view his or her SecurePRO™ card you must be a ProZ.com Business member or Plus subscriber.
Affiliations
This person is not affiliated with any business or Blue Board record at ProZ.com.
English to Russian: Строительные машины, гидропривод
Source text - English Special pump for excavators
The A**** swashplate type pump for the open circuit (fig. 24) was designed in the form shown specifically for LUDV systems. The diesel engine flange and the pump housing are one component. This gives the pump as a whole a very short, rigid construction. The flat-design controller lies in the contour of the pump body and does not pretrude beyond the end of the pump. The controller has only a small number of ports and these lie parallel to the pump to save space. The drain and bleed ports are arranged in such a way that the pump can be fitted in any desired position in the excavator. This construction allows considerable possibility in the design of the oil tank compartment and position.
Demand for higher power makes larger diesel engines necessary in some cases. The more stringent noise emission regulations mean that more room is needed for encapsulation of the IC engine and pump. This increasingly eats into the space available for mounting the pump, so that a compact pump such as the A**** is needed.
In addition, diesel engine speeds are reduced due to pollutant emissions. This in turn calls for larger pumps in order to main comparable flows. A streamlined pump compartment together with the compact A**** allow larger pump sizes to be achieved, as well as making assembly and service easier.
Translation - Russian Специализированный гидронасос для экскаваторов
Гидронасос A**** в конструктивном исполнении, показанном на рис. 24, был разработан для использования в системах с распределением потоков между потребителями независимо от нагрузки (LUDV). A**** представляет собой аксиально-поршневой насос с наклонным диском, рассчитанный на работу в гидроприводах с разомкнутым потоком. Фланец для крепления к дизельному двигателю выполнен заодно с корпусом насоса. Благодаря этому насос в сборе имеет малую длину и обладает высокой жесткостью конструкции. Регулятор размещен в плоском корпусе, который находится в пределах контура поперечного сечения насоса и не выступает за его задний срез. Для подключения к регулятору используется всего несколько отверстий. Чтобы сэкономить объем отсека машины, эти отверстия направлены вдоль насоса. Сливные и дренажные отверстия в корпусе насоса расположены таким образом, чтобы обеспечить возможность установки насоса на экскаваторе в любом желаемом положении. Это существенно упрощает проектирование гидробака и компоновку отсека с насосом.
Необходимость повышения мощности силовой установки в некоторых случаях приводит к использованию более крупногабаритных дизельных двигателей. Введение более строгих норм, регулирующих уровни создаваемого шума, требует увеличения размеров отсека для установки двигателя и насоса. Все это существенно уменьшает объем, доступный для размещения насоса, что приводит к необходимости применения компактных насосов типа A****.
Кроме того, для уменьшения токсичности отработавших газов необходимо понижать рабочие обороты двигателя. Это, в свою очередь, вынуждает производителей использовать насосы большего рабочего объема, позволяющие получить требуемую подачу. Рациональная компоновка отсека для установки насоса в сочетании с малыми габаритными размерами насосов серии A****, позволяет применять насосы большего рабочего объема, а также упростить сборку и обслуживание машины.
English to Russian: Деревообрабатывающее оборудование
Source text - English Installation for adhesive application in a finger-jointing operation
Matrix applications
Matrix application is a method where the tool applying adhesive has been formed in the same way as the surface to be coated with adhesive.
The Mixon matrix applicator is a complete device which transfers the adhesive to the cut-off surface of the wood under pressure and with controlled dosage and amount of adhesive, thus saving adhesive and providing good conditions for strong bonding.
...
Good regulation ability
The gluing application opening time is controlled by an automatic valve fitted to the gluing matrix. In this way reaction is optimised at the same time as any excess adhesive can be minimised at the start and end of the gluing sequence.
The amount and linearity of the gluing application over the whole surface is controlled by the hydraulically controlled dosage assembly.
Simple cleaning
Loss of adhesive on cleaning is limited to the 0.1 litres of mixed adhesive which is the maximum amount of adhesive held. The equipment can be flushed normally without disassembly during daily maintenance. Water consumption on flushing may vary with different types of adhesive, but is always extremely low in comparison with conventional methods.
The application matrix can be dismantled with simple movements for more comprehensive cleaning. Where detergents are used the equipment is fitted with a detergent pump.
Translation - Russian Клеенаносящая система для линий сращивания
Нанесение клея профильной гребенкой
Данный метод нанесения клея предполагает использование клеенаносящего инструмента (гребенки) с профилем, повторяющим профиль поверхности заготовки, на которую должен быть нанесен клей.
Устройство нанесения клея Mixon с профильной гребенкой представляет собой комплектный узел, подающий клей под давлением к поверхности деревянной заготовки. Он обеспечивает требуемые соотношение компонентов и расход клеевой смеси. Благодаря этому достигается экономия клея и создаются условия для получения прочного соединения.
...
Возможность регулирования параметров клеенанесения
Время начала подачи клея задается автоматическим клапаном, входящим в конструкцию клеенаносящего устройства. Это позволяет оптимизировать время начала подачи и, как следствие, предельно сократить отходы клея, образующиеся в начале и в конце цикла нанесения.
Требуемый расход клея и равномерность нанесения по всей длине заготовки обеспечиваются дозирующим блоком с гидравлическим приводом.
Удобство очистки
Потери готовой клеевой смеси при очистке ограничиваются максимальным количеством смеси, находящейся в системе, которое равно 0,1 л. При соблюдении правил эксплуатации промывка может выполняться без разборки системы во время ежедневного технического обслуживания. Количество воды, затрачиваемое на промывку, зависит от типа применяемого клея, однако в любом случае оно будет значительно меньше, чем при использовании традиционных систем клеенанесения. Профильная гребенка наносящего устройства легко снимается для более тщательной очистки. При необходимости в состав системы может быть введен насос для подачи раствора моющего средства.
More
Less
Experience
Years of experience: 19. Registered at ProZ.com: Mar 2008.
Specialization
Translation of technical documentation, learning courses and marketing collateral related to:
• construction, road-building, agricultural and forestry machinery
• automotive
• metal- and woodworking equipment
• hydraulic systems of industrial and mobile equipment
Recent projects
• Series of brochures on large excavators, wheel loaders and off-highway dump trucks
• Learning courses on quarries and aggregates end products and value chain; hauling systems; quarry site safety
• Maintenance manual on wheel loader transmission
• Operation and Maintenance manual on gas engine
• Set of drawings of industrial ball valves
Engineering background
• 3 years as a designer of production facilities for woodworking and furniture industry
• 2 years as a designer of hydraulic systems for industrial and mobile equipment
Education
Master’s Degree in Aircraft Design and Manufacture,
National aerospace university 'Kharkov Aviation Institute'
This user has earned KudoZ points by helping other translators with PRO-level terms. Click point total(s) to see term translations provided.