English to Czech Tech/Engineering Telecom(munications)

v návodu k radiostanici Harris, viz https://snipboard.io/ZuU6jg.jpg

"Even though the Transmit Power may be set to a particular value, the radio will not necessarily operate at that level. There are a few factors which dictate what actual Transmit Power will be used for a particular transmission burst: current RF Frequency and current Burst Rate."

"EIM Detection
Since interference may not affect both radios in a link, EIM is configured to detect interference separately on the SC and SS radios. EIM looks for unusually low SINADR for a given RSSI, unusually high bit-error rates and an unusually high noise floor. Link Min Burst Rates are used as the threshold for interference detection. The Min Burst Rate should be set to the lowest value that achieves the necessary throughput for a particular Link. SNMP traps are sent to network managers when EIM events occur and when interference has cleared."