19:45 Jan 9, 2024 |
|
English to Romanian translations [PRO] Tech/Engineering - Medical: Instruments | |||||||
---|---|---|---|---|---|---|---|
|
|
Summary of answers provided | ||||
---|---|---|---|---|
4 | ștuț rotativ |
|
Summary of reference entries provided | |||
---|---|---|---|
see |
| ||
fitinguri-push-in |
|
Discussion entries: 2 | |
---|---|
ștuț rotativ Explanation: https://www.gecko-fastener.com/EN/show_artikel/175/96/Barbed... https://www.dharma-utilaje.ro/cumpara/stut-rotativ-furtun-5-... |
| |
Login to enter a peer comment (or grade) |
7 mins peer agreement (net): +1 |
Reference: see Reference information: https://www.gps.co.uk/product-category/aircraft-aviation-acc... -------------------------------------------------- Note added at 8 min (2024-01-09 19:54:05 GMT) -------------------------------------------------- barbed push-lok fitting https://www.powermotiontech.com/technologies/fittings-coupli... -------------------------------------------------- Note added at 12 min (2024-01-09 19:58:15 GMT) -------------------------------------------------- push-in fitting https://tameson.co.uk/products/f25rj-4mm-x-4mm-tee-push-in-f... -------------------------------------------------- Note added at 13 min (2024-01-09 19:59:09 GMT) -------------------------------------------------- trouble is none of these can I find in relation to incubators! -------------------------------------------------- Note added at 17 min (2024-01-09 20:02:42 GMT) -------------------------------------------------- other findings: https://assets.thermofisher.com/TFS-Assets/LED/manuals/D2174... The incubator has 1/4” "barbed fittings" on the back of the cabinet to connect the gas supply. Refer to Figure 1-11. The fitting is labeled CO2. Inlet #1. -------------------------------------------------- Note added at 26 min (2024-01-09 20:11:56 GMT) -------------------------------------------------- https://www.fruugo.ro/kit-de-montare-pentru-irigare-prin-pic... -------------------------------------------------- Note added at 1 godz. (2024-01-09 20:53:18 GMT) -------------------------------------------------- Barbed Fittings for 12mm, 16mm, 20mm, 25mm and 32mm sprinkler-irrigation.co.uk https://sprinkler-irrigation.co.uk › pipe-accessories › b... Barbed Fittings are a compact one piece, push-on hose barbed fitting for a quick,economical way to connect polyethylene tubing. |
| ||
Note to reference poster
| |||
Login to enter a peer comment (or grade) |
2 hrs |
Reference: fitinguri-push-in Reference information: thermofisher.com page 20 Note For customer convenience, 12 feet of 1/4” ID vinyl tubing with two 3/8” hose clamps are in cluded in the shipping materials for connecting the uinit ot he gas supply. The incubator has 1/4” barbed fittings on the back of the cabinet to connect the gas supply. Refer to Figure 1-11. The fitting is labeled CO2 Inlet #1. Install 3/8” hose clamps to secure the 1/4” ID tubing to the barbed fitting on the regulator and the rear of the electronics drawer. Warning This incubator is designed to be operated with CO2 gas only. Connecting a flammable or toxic gas can result in a hazardous condition. Gases other than CO2 should not be connected to this equipment. The CO2 gas supply being connected to the incubator should be industrial grade, 99.5% pure. Do not use CO2 gas cylinders equipped with siphon tubes. A siphon tube is used to extract liquid CO2 from the cylinder which can damage the pressure regulator. Consult with your gas supplier to ensure that the CO2 cylinder does not contain a siphon tube. A two-stage CO2 pressure regulator is required to be installed on the outlet valve of the gas cylinder. The high pressure gauge at the tank should have a 0-2000 psig range and the low pressure gauge at the incubator inlet should have a 0-30 psig range. Input pressure to the incubator must be maintained at 15 psig (103.4 kPa) maximum, for proper performance of the CO2 control system .automatizari-industry.ro/fitinguri-push-in/ anglicized vocabulary FITINGURI PUSH-IN fitinguri camioane tip push in fitinguri pentru sistemul de franare al camioanelor Fitingurile prin montare instantanee prin impingere au fost proiectat pentru a fi utilizate cu (Rilsan) 11/12 poliamidă sau (Hytrel) tuburi elastomerice poliester pe circuitele pneumatice ale sistemelor auxiliare și de frânare pe camioane și remorci. Este un echipament de siguranță gata de utilizare care nu necesită unelte sau echipamente suplimentare pentru cuplarea cu tuburile. Singura operație necesară este introducerea manuală a tubulaturii în scaunul fitingului. Acest lucru face ca timpul de asamblare sa fie mult mai scurt decât montarea prin cuplarea tradițională de tip inel de tăiere. Timpul de asamblare este estimat a fi cu 70%÷80% mai scurt. Toleranța tuburilor utilizate trebuie să respecte cu strictețe cele stabilite în standardul ISO 7628 și standardul DIN 74324/73378. -------------------------------------------------- Note added at 3 hrs (2024-01-09 22:48:06 GMT) -------------------------------------------------- linker https://assets.thermofisher.com/TFS-Assets/LED/manuals/D2174... https://www.automatizari-industry.ro/fitinguri-push-in/ -------------------------------------------------- Note added at 3 hrs (2024-01-09 22:50:49 GMT) -------------------------------------------------- Durometrul tubulaturii În cele din urmă, luați în considerare durometrul tubului dvs. Fitingurile cu barb creează o etanșare mai bună pe un furtun puțin mai moale, în timp ce fitingurile cu apăsare rapidă sunt mai ușor de utilizat cu un furtun mai rigid. De exemplu, Clippard recomandă folosirea tubului nostru de poliuretan cu durometru 85A pentru fitingurile ghimpate și tuburi din poliuretan cu durometru de 95A pentru fitingurile rapide . https://assets.thermofisher.com/TFS-Assets/LED/manuals/D21741.pdf https://www.automatizari-industry.ro/fitinguri-push-in/ |
| |
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.